Sport Racing Touring

Power Shifter Cnc Racing Ducati Sport Touring St4

Power Shifter Cnc Racing Ducati Sport Touring St4
Power Shifter Cnc Racing Ducati Sport Touring St4

Power Shifter Cnc Racing Ducati Sport Touring St4

POWER SHIFTER CNC RACING DUCATI SPORT TOURING ST4. Load cell technology (Strain Gauge) Able to work both pushing and pulling, - 2 parallel outputs. Digital, settable as normally open or normally closed circuit, connection with Dynojet Power Commander and Rapid Bike.

Analog, 0-5V, settable in one or both directions. Reading range: 0÷100Kgf, connection with Marelli, Motec and similars and Data Loggers, - Instructions for YEC, HRC and YOSHIMURA ECUs, - Calibrated and calibratable at any time, - MAX LOAD recording, - CURRENT LOAD display, - Failure Check warning, - Automatic temperature, vibrations and creep adjustment, - Set as normally Open/Close, Eventual Digital output to allow the DIRECT CUT of Injection/Ignition Power - Plug&Play connectors for most Japanese sports bikes, Ducati, Aprilia, KTM, Triumph, Guzzi BMW, Morini, Bimota, BENELLI. For any other bike an electric wiring scheme is given, - Compushift feature (switchable off) automatically evaluate the best killtime for each upshift, according to engine conditions, load, rpm and acceleration, making a choice between 500 different killtime in the range 20÷180ms, - Smoothshift feature to ease the shock loads on the gear box and chain and to lessen loss of traction at upshift, Thanks to this it's possible to change gear at full throttle even at maximum tilt angle. Dimensions: f=15mm, L=55mm, - Provided with rod already holed and threaded, just to be cut. Available either M6 or M8 holes.

Rod gear shift link available as optional: CEA01B. Notice : please indicate the model / year of the motorcycle in the additional notes of the order.

IBAN: SM 49 Z 08540 09805 000050123428. Some special items and / or items that require preparation / calibration can take from 5 to 15 days.

1The original packaging must be as intact and immaculate as received. 2 The material must be carefully protected to prevent it from being damaged during transport. Never release negative or neutral feedback quickly!! THE NEGATIVE FEEDBACKS GENTLY DENIGRATORS OR WITHOUT FUNDAMENTAL WILL BE DENIED TO THE COMPETENT AUTHORITIES WHICH DEFAMATION BY MEDIA.

The customer with all warranties including withdrawal therefore any problem will be solved where possible. Feedback for us is very important, please, once the operation is completed, release your comment on our profile, once we receive the feedback, Sestamarcia will also release it as soon as possible. Can I have custom kits when possible?

Where specified within the article eg mono ohilins, kit forks, etc. What should I do when I get my orders? When the courier delivers, you will need to verify.

AThat the package is intact, not damaged or wet and in any case conforms to the standard characteristics of a package. B That the number of packages (number of packages) indicated on the bill corresponds to the number of packages actually delivered.

Any disputes must be raised immediately to the carrier, in the absence of these the product is considered delivered correctly. If the receipt of the goods there is damage to the packaging you must. Aexpress a specific reservation: the package is accepted but before signing the document must write Agree with reservation specify why RESERVE, eg. "Packaging broken", packaging with bruising on the right side... It will be possible after opening the package and found it damaged, be compensated for damage suffered.

Breject the damaged goods if it is impossible to accept the parcel subject or if the damage is visible without opening the package. I can order items that are not present at the store? GET ALL THE LATEST NEWS, UPDATES AND SPECIAL OFFERS ON OUR STORE. Sestamarcia is a company that for over 25 years has been taking care of the safety of the motorcyclist and also thinks about the people behind the wheel. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Body & Frame\Other Body & Frame".

The seller is "sestamarcia-racing-parts" and is located in this country: IT.

  • Brand: CNC RACING
  • Manufacturer Part Number: CE710N
  • Warranty: 2 Year
  • Modified Item: No
  • Country/Region of Manufacture: Italy
  • Bike model: DUCATI
  • Color: NATURAL


Power Shifter Cnc Racing Ducati Sport Touring St4